|
Lightweight
and Portable With Variable Arm Length
Reach 38-55"
(96-140cm)
Boom 41-68" (104-173cm)
Wt. 29 lbs. (13.2kg)
Click
Here for Specifications
Comparison Chart
See also: Learning Center Articles
Designed for videographers and 16mm cinematographers who need to travel light. Weighing only 29 lbs. (13.2kg), it supports 40 lbs. (18kg) of camera and fluid head. So compact, it folds up with no loose parts and fits into a baby tripod case. Its unique telescopic design allows it to work in constricted areas and also unfold to create a dramatic 6 foot lift. And best of all, it uses the 100mm style tripod and head you already own. Like the rest of the Losmandy line, it is manufactured to the highest quality standards: all parts are anodized black machined aluminum or stainless steel. All moving parts are controlled by sealed precision ball bearings. Bubble levels are located on the center column and camera plate for easy levelling. With a weight ratio of less than one-to-one, and the sliding counterweight shaft for fine tuning, the arm can be balanced in a matter of seconds, with a limited number of counter weights. Since no chains, belts or cables are used, the Losmandy Porta-Jib Traveller requires little maintenance. Boom friction and pan friction with variable drag are standard features. Base price includes Vector Balancing Bar, soft case and 35 lbs. (16kg) of counter weights.
| ACCESSORIES: |
|
|
| 7 lb fine-tuning weight |
|
$65 |
Custom Case with compartment for
Fine Tuning Weight and Vector Bar |
Wt. 20 lbs. (9kg) |
$450 |
| |
|
|
| Although the Traveller is designed to mate with any 100mm tripod, many prefer to have a heavier tripod for jib work. |
| Traveller Adapter for 150mm Tripod |
Wt. 2 lbs. (1kg) |
$175 |
| Traveller Adapter for Mitchell Tripod |
Wt. 2 lbs. (1kg) |
$25 |
Or, use our |
|
|
Lightweight Tripod
(requires LWTB-
-interfaces Traveller to LW Tripod) |
Wt. 14 lbs. (6.4kg) |
$550 |
| LWTB |
|
$175 |
| |
|
|
|
|
Shown with optional
tripod & 7 lb fine tuning weight
Click
for larger image
Folds
to 31"
NOW
COMES WITH
VECTOR BALANCING
BAR!
| Note: 100mm tripod systems may not be designed for the additional payload of the jib, and counterweights. Leg locks, in particular, may be inadequate to support this additional weight. Put legs in their most collapsed position to avoid stressing the locks. If using tripod legs mounted on a 3-wheel dolly, be careful to always push in the direction of an opposing leg to avoid tipping the system. |
 
Custom Case
LWT Tripod |
See a video on balancing the Vector Bar